SNOWPEAK® 13X-HP Molecular Sieve
Technical Specification
| Technical Specification | |||
| Type | 13X-HP | ||
| Nominal Pore Diameter | 10 angstroms | ||
| Diameter(mm) | 1.6-2.5 | 2.5-3.5 | 3.5-4.75 |
| Bulk Density(g/ml) | ≥0.69 | ≥0.69 | ≥0.69 |
| Crush Strength(N) | ≥25 | ≥50 | ≥65 |
| Wear Ratio(%) | ≤0.2 | ≤0.2 | ≤0.2 |
| Water Content(%) | ≤1.5 | ≤1.5 | ≤1.5 |
| Static H2O Adsorption(%) | ≥28 | ≥28 | ≥28.5 |
Regeneration
SNOWPEAK 13X-HP molecular sieve can be purged and regenerated by increasing the temperature, regeneration (dehydration) degree depends on the humidity and temperature of the purging gas.
Water removal: Heat dry gas such as nitrogen, air, hydrogen, saturated hydrogen carbide to 150-320℃, then pass it into the molecular sieve bed under the pressure of 0.3-0.5kg/m2 for 3-4 hours, and then pass the dry cold gas into the adsorber for 2-3 hours, isolate the air and cool it to room temperature.
Organic removal: Replace the adsorbent from the molecular sieve by water vapor, and then heat. Or pass into hot vapor or inert gas at the in 200-350°C, not use gases that produce explosive mixtures by contact with the adsorbent.
Gas removal: reduce the pressure
Application
Adsorption and separation of hydrogen, oxygen, nitrogen, methane, carbon monoxide, carbon dioxide, sulfide and other gases and liquids;
Storage
Room temperature; indoor humidity no more than 90%; avoid water, acid, alkali; isolate air; sealed preservation
Packing
Iron drum, net weight 125/135/140kg; or according to customer requirements